Flue Kit Systems

Wildcat Flue Systems is a premier source of custom, modular prefabricated stainless-steel flues, food service grease ducts and in-line draft induction fans. Our team of technical experts designs and manufacture each product with unmatched dimensional accuracy, unequalled product support limits, fast product lead-times – saving our customers time, money, delays and callback expense.

Flue Components

Keep your stove burning efficiently with the right parts and accessories, from pipes and chimney caps to fireplace tools.


For redirecting the pipe to 45°

Ceiling Rings

Decorates your ceiling and centralizing the pipes safely

Cowl Base

Base support for your cowl.


Designed to allow the smoke to escape but not allow rain down the flue


Insulate between the masonry and flue liner.


For your freestanding heater


Placed on top of the flue (outside)


Redirecting the pipe to 45° where installation is tough


Convert the diameter of the flue pipe system from Y to Z

Gas Ranges

Pipe or channel for conveying exhaust gases

Wood Ranges

Convert the diameter of the flue pipe system from Y to Z

Flue Kit Installation Instructions

WARNING: To ensure safety, this flue kit must be installed as outlined in these instructions and the appropriate requirements of the relevant building code or codes. Wood fire and flue clearances from the combustible walls must be in accordance with the specifications. These installation instructions are for tested appliances only.


CAUTION: Mixing flue system components from different sources or modifying the dimensional specification of components may result in hazardous conditions. Where such actions is considered, WIldcat should be consulted in the first instance. It is the responsibility of the installer to ensure the installatin of this flue kit complies with the appliance manufacturers’ specifications for flue pipe shield and ceiling plate and that the relevant building codes are adhered to. Bends and extentions to the lenght of a flue system are permitted.

Flue Kit Roof Installation

Wildcat Flue Systems should be at least 1000mm above the top of the opening. In summary in order to satisfy the building regulations if a flue or chimney exits the roof more than 600mm from the ridge of the roof then the horizontal distance from the top of the flue or chimney should be at least 2300mm above the roof or ridge.

Design, Supply and Installation Specialists of Custom Flue Systems

With over 30 years experience, our services include the design supply and installation of all types of flue systems serving appliances such as water heaters, boilers, mass heaters, air movement systems, bakery ovens, commercial fire places, generator flues, and coffee roasting exhaust systems.