Default 10 Solid w/ Heat Shield Flue Kit System
| QTY | DESCRIPTION |
|---|---|
| 4 x | 6” Stainless Steel Inner Flue 915mm Long |
| 2 x | 7¾” Painted Solid 915mm Long |
| 2 x | 8” Galvanized Inner Flue Casing 915mm Long |
| 1 x | 8”-10” Half Painted Drop Tube |
| 1 x | 10” Galvanized Outer Flue Casing 915mm Lon |
| 1 x | Anti-Downdraft Wind Rim Cowl |
| 1 x | Ceiling Ring |
| 1 x | Locator Ring |
| 1 x | 2-Part Heat Shield |
| 1 x | Brackets & Screws |
| 2 x | 50 x 50 Angles 915mm Long |
| 1 x | Installation Guide |
Dimensions: 460(W) x 460(D) x 1150(H) mm 32kg
WARNING: To ensure safety, this flue kit must be installed as outlined in these instructions and the appropriate requirements of the relevant building code or codes. Wood fire and flue clearances from the combustible walls must be in accordance with the specifications. These installation instructions are for tested appliances only.
CAUTION: Mixing flue system components from different sources or modifying the dimensional specification of components may result in hazardous conditions. Where such actions is considered, WIldcat should be consulted in the first instance. It is the responsibility of the installer to ensure the installatin of this flue kit complies with the appliance manufacturers’ specifications for flue pipe shield and ceiling plate and that the relevant building codes are adhered to. Bends and extentions to the lenght of a flue system are permitted.
Flue Kit Roof Installation
Wildcat Flue Systems should be at least 1000mm above the top of the opening. In summary in order to satisfy the building regulations if a flue or chimney exits the roof more than 600mm from the ridge of the roof then the horizontal distance from the top of the flue or chimney should be at least 2300mm above the roof or ridge.
Other Flue Kits
